El trueque es el presente y el futuro del comercio internacional, especialmente para las personas que se inician en el negocio de importación y exportación. El trueque y más, operaciones triangulares.
La segmentación perfecta para sus propuestas de negocio, Sus lugares de destino, además de su clase de clientes objetivo, además de sus artículos y categorías.
The crushing shaft is the main component of the crushing material. The purpose of crushing coal is achieved by grinding the crushing coal with the cutter teeth, cutter base and scraper chain.
The broken shaft assembly shall be sent out after trial operation in conjunction with other accessories after assembly. It is not suitable to be disassembled during transportation or re-installation. It can be put into installation.
1. Place the crushing box horizontally, remove the top cover, clear the sundry in the box body, and apply anti-rust oil on the processing surface.
2. Place the crushing shaft set in the notch smoothly.
3. Lower the crushing shaft set slowly and settle on the notch bottom plane smoothly.
4. Use grease to empty the air in the rubber hose of bearing seat. Connect the manual oil dry station with the rubber hose of bearing seat until the labyrinth ring on both sides of the bearing seat spills oil.
5. Install the pressure plates on both sides.
6. Adjust the crushing lumpiness of coal by tempering height.
Crushing shaft group from installation, commissioning, delivery one-stop service. If you need crusher parts, you are welcome to call us